Woodmax WR 13.50V
The technical data sheets are only available upon the customers’ request through e-mail
Technical Card FormWoodmax WR 13.50V
Description
Single-component, modified polyvinyl acetate dispersion based adhesive with D3 water resistance class in accordance with PN-EN 204. After achieving full strength, the bond has very good adhesiveness to wooden surfaces under static and dynamic loads with a good initial grip.
-
- gluing solid wood in construction interior joinery manufacturing
- gluing softwood
- gluing hardwood
- gluing floor panels
- gluing chipboards and fiberboards, gluing plywood
- gluing other wood-based materials
- intended for use in cold presses and manual gluing
- intended for use in hot presses for pasting veneer or laminate to chipboards and MDFs
-
Sizing process
It is recommended to thoroughly mix the adhesive before use. The adhesive may be applied on one or two sides, using a brush, spatula, bottle with a feeder, applicator, manual roller or machine (with nozzles or rollers).
Parameters
| Viscosity | pH | MTTF | Strength After 25 minutes | Weld |
|---|---|---|---|---|
| High | Does not cause discoloration | approx. 6 [°C] | min. 4 [MPa] | colorless, flexible, not blunting tools, ageing-resistant |
-
Viscosity pHHigh Does not cause discolorationMTTF Strength After 25 minutesapprox. 6 [°C] min. 4 [MPa]Weldcolorless, flexible, not blunting tools, ageing-resistant
Previous
Back to list