Woodmax WR 13.50M

The technical data sheets are only available upon the customers’ request through e-mail

Technical Card Form

Woodmax WR 13.50M


Single-component, modified polyvinyl acetate dispersion based adhesive with D3 water resistance class in accordance with PN-EN 204. After achieving full strength, the bond has very good adhesiveness to wooden surfaces under static and dynamic loads with a good initial grip. The adhesive is certified by IFT Rosenheim and Wood Technology Institute in Poznań for D3 class in accordance with PN-EN 204 standard.

    • gluing solid wood in construction interior joinery manufacturing
    • gluing softwood
    • gluing hardwood
    • gluing window joinery
    • gluing floor panels
    • gluing chipboards and fiberboards, gluing plywood
    • gluing other wood-based materials
    • intended for use in cold presses and manual gluing
    • intended for use in hot presses for pasting veneer or laminate to chipboards and MDFs

  • Sizing process

    It is recommended to thoroughly mix the adhesive before use. The adhesive may be applied on one or two sides, using a brush, spatula, bottle with a feeder, applicator, manual roller or machine (with nozzles or rollers).


ViscositypHMTTFStrength After 25 minutesWeld
HighDoes not cause discolorationapprox. 6 [°C]min. 4 [MPa]colorless, flexible, not blunting tools, ageing-resistant
  • Viscosity pH
    High Does not cause discoloration
    MTTF Strength After 25 minutes
    approx. 6 [°C] min. 4 [MPa]
    colorless, flexible, not blunting tools, ageing-resistant