Woodmax W 11.45
The technical data sheets are only available upon the customers’ request through e-mail
Technical Card FormWoodmax W 11.45
Description
Single-component, polyvinyl acetate dispersion based adhesive with D1 water resistance class in accordance with PN-EN 204. After achieving full strength, the bond has good adhesiveness to wooden surfaces under static and dynamic loads with a good initial grip.
-
- gluing chipboards and fiberboards
- gluing other wood-based materials
- gluing dowels and slats
- intended for use in cold presses and manual gluing
- long-open-time adhesive
- upholstered furniture frames manufacturing
- gluing softwood
- installation pasting (dowel pin joints)
- the adhesive may be used for micro-dovetail joints
-
Sizing process
It is recommended to thoroughly mix the adhesive before use. The adhesive may be applied on one or two sides, using a brush, spatula, bottle with a feeder, applicator, manual roller or machine (with nozzles or rollers).
Parameters
| Viscosity | pH | MTTF | Strength After 25 minutes | Weld |
|---|---|---|---|---|
| High | Does not cause discoloration | approx. 0 [°C] | - | - |
-
Viscosity pHHigh Does not cause discolorationMTTF Strength After 25 minutesapprox. 0 [°C] -Weld-
Previous
Back to list