Hydro-insulations and cement-based products

The technical data sheets are only available upon the customers’ request through e-mail

Technical Card Form

Hydro-insulations and cement-based products

Description

Synthos products are recommended for modifying and plasticizing cementitious grouts and as a binder in different types of flexible coatings. They may also be used for any hydro-insulation products, both single- and two-component, and as an ingredient of bituminous emulsions.

Parameters

Product NameProduct descriptionApplicationPolymer typepHDry matter content [%]MTTF [˚C]Tg [˚C]
Osakryl®
OSA H
Binder for manufacturing two-component hydro-insulation masses based on cement and for concrete modificationSingle-component hydro-insulations Two-component hydro-insulations Cement-based products Products for bituminous emulsionsS/A7,0÷7,855±1<0approx. (-40)
Synexil®
MDP 50
Vinyl-maleic copolymer, binder in interior paints, decorative masses and plastersCement-based productsS/A3,5÷5,050±2approx. 5approx.19
Osakryl®
AH 035
Binder for manufacturing acrylic sealants and liquid films, construction adhesives, as well as hydro-insulation masses. Suitable for low-VOC productsSingle-component hydro-insulations Products for bituminous emulsionsA5,0÷6,058±1approx. 0approx. (-30)
Synexil®
SAB 08LV
Binder for manufacturing protective interior and exterior coatings, does not contain ammoniaCement-based productsS/A7,5÷8,549±1<5approx.6
  • Osakryl®
    OSA H

    Application Polymer type
    Single-component hydro-insulations Two-component hydro-insulations Cement-based products Products for bituminous emulsions< S/A
    Product description
    Binder for manufacturing two-component hydro-insulation masses based on cement and for concrete modification
    Dry matter content [%]
    55±1
    pH MTTF [˚C] Tg [˚C]
    7,0÷7,8 <0 approx. (-40)
  • Synexil®
    MDP 50

    Application Polymer type
    Cement-based products< S/A
    Product description
    Vinyl-maleic copolymer, binder in interior paints, decorative masses and plasters
    Dry matter content [%]
    50±2
    pH MTTF [˚C] Tg [˚C]
    3,5÷5,0 approx. 5 approx.19
  • Osakryl®
    AH 035

    Application Polymer type
    Single-component hydro-insulations Products for bituminous emulsions< A
    Product description
    Binder for manufacturing acrylic sealants and liquid films, construction adhesives, as well as hydro-insulation masses. Suitable for low-VOC products
    Dry matter content [%]
    58±1
    pH MTTF [˚C] Tg [˚C]
    5,0÷6,0 approx. 0 approx. (-30)
  • Synexil®
    SAB 08LV

    Application Polymer type
    Cement-based products< S/A
    Product description
    Binder for manufacturing protective interior and exterior coatings, does not contain ammonia
    Dry matter content [%]
    49±1
    pH MTTF [˚C] Tg [˚C]
    7,5÷8,5 <5 approx.6