Woodmax WK 2

The technical data sheets are only available upon the customers’ request through e-mail

Technical Card Form

Woodmax WK 2


Single-component, polyvinyl acetate dispersion based adhesive with D2 water resistance class in accordance with PN-EN 204. After achieving full strength, the bond has good adhesiveness to wooden surfaces under static and dynamic loads with a good initial grip.

    • gluing chipboards and fiberboards
    • gluing other wooden and wood-based materials
    • intended for use in cold presses and manual gluing

  • Sizing process

    It is recommended to thoroughly mix the adhesive before use. The adhesive may be applied on one or two sides, using a doweler, bottle with a feeder, applicator, brush. The glued surface should be evenly covered with the adhesive.


ViscositypHMTTFStrength After 25 minutesWeld
LowDoes not cause discolorationapprox. 5 [°C]-colorless, not blunting tools, ageing-resistant
  • Viscosity pH
    Low Does not cause discoloration
    MTTF Strength After 25 minutes
    approx. 5 [°C] -
    colorless, not blunting tools, ageing-resistant